some questions about the new firmware 1.6.5

[xpert]

Hello Admir,
I have some questions about the new firmware 1.6.5
ch.1 = pedal, Ch.2 = HiHat (ch.2 for the HiHat now only mono?)
ch.3 = kick, ch.4 / 5 = snare,
ch.6 = Tom1, (how does it work with the two notes, only when the outcome of mono?)
All outputs must be changed, because now several signals available?

Greeting Xpert

[admir]

Hello Admir,
I have some questions about the new firmware 1.6.5
ch.1 = pedal, Ch.2 = HiHat (ch.2 for the HiHat now only mono?)
ch.3 = kick, ch.4 / 5 = snare,
ch.6 = Tom1, (how does it work with the two notes, only when the outcome of mono?)
All outputs must be changed, because now several signals available?

Greeting Xpert

That's correct, firmware goes one step ahead of hardware... hihat and tom inputs have edge sounds implemented in firmware, but not yet in hardware. That's because I backport those features from eDrum24 to smaller models.

[xpert]

OK, thanks for the quick response.

[xpert]

hello Admir ,
I have the firmware 1.6.5 15ch raised and all the connections for the exits. Now, however, only the HiHat when starting on the second (Edge) is connected to a pad. All other ports work well. When the firmware 1.6.3 was not, because everything worked as it should be?

Greeting Xpert

[xpert]

hello Admir ,
I have the firmware 1.6.5 15ch raised and all the connections for the exits. Now, however, only the HiHat when starting on the second (Edge) is connected to a pad. All other ports work well. When the firmware 1.6.3 was not, because everything worked as it should be?

Greeting Xpert

Hi Admir,
Sorry, but my English is not particularly good, I hope you understand my problem. I did yesterday the new firmware 1.6.5 15 ch. installed and all outputs as amended, as in the firmware. The extent that everything will work quite well, but ch.2 HiHat only works, albeit at 2.Port (Rim) a pad on a free channel is installed? Accordingly, but still have a channel to do so? Is it correct?
Greeting xpert

[xpert]

That's correct, firmware goes one step ahead of hardware... hihat and tom inputs have edge sounds implemented in firmware, but not yet in hardware. That's because I backport those features from eDrum24 to smaller models.

Hi admir,
The new firmware like me very well, just like you get the HiHat to run? For all other channels, everything is OK, only when HiHat I get no sound out, if not on 2 Starting a channel is connected. What should I change because even so it works?

[admir]

I don't really understand your problem with hihat. 

[xpert]

my problem is that for the HiHat two channels are needed, otherwise it will not work.


Greeting xpert

[admir]

my problem is that for the HiHat two channels are needed, otherwise it will not work.


Greeting xpert

What 2 channels? Still don't understand your problem. Somebody on the forum understands what he is trying to say?

[xpert]

My English does not so feel well, but I try to describe the problem. I had installed  the Firmware 1.6.3. There work everything as well as it should be. Now I have installed the Firmware 1.6.5 and for the moment have as left all exits as they were. As I could see to myself all chanals about 1 step forwards moves. Port 2 (HiHat) still with both chanals equips (ch2 + ch3) = HiHat and kick functioned, however if I remove ch3 from Port 2 to Port 3, I get out from the Port 2 (HiHat) no sound. Port 3 and all the other Ports function Perfectly. I do not know myself, why this is so? I hope I could pose so better my problem?

[admir]

Current firmware channel mappings:


Input                         Jack              
--------------------          -------           
 1   - HiHat Pedal            mono              
 2   - HiHat + Edge           stereo            
 3   - Kick                   mono              
 4   - Snare                  stereo            
 5   - Snare (Rim)            (wired together)  
 6   - Tom1                   mono              
 7   - Tom2                   mono              
 8   - Tom3                   mono              
 9   - Tom4                   mono              
10   - Tom5                   mono              
11   - Tom6                   mono              
12   - Cym 1 + Edge           stereo            
13   - Cym 2 + Edge           stereo            
14   - Cym 3 + Edge           stereo            
15   - Cym 4 + Edge           stereo            
16   - Cym 5 + Edge           stereo            
17   - Cym 6 + Edge           stereo            
18   - Cym 7                  mono              
19   - Cym 8                  mono              
20   - Aux 1 + Edge           stereo            
21   - Aux 2                  mono              
22   - Aux 3                  mono              
23   - Aux 4                  stereo            
24   - Aux 5                  stereo            

[xpert]

Hi Admir,

I have carefully reviewed all times, it is certainly not a software error. It is the 1st analog board.  I must again correct view, there is probably a hardware error. I am currently a 24 Ch edrum to build, there is this error not exist.

Thank you for the Firmware channel mapping.

Greeting xpert