Author Topic: How to use RS232 port  (Read 9447 times)

0 Members and 1 Guest are viewing this topic.

Offline admir

  • Administrator
  • eDrum Hero
  • *****
  • Posts: 1332
    • View Profile
    • http://www.edrum.info/
How to use RS232 port
« on: September 25, 2005, 03:19:59 PM »
You have to install this driver:

find it here:
http://www.yamahaproaudio.com/downloads/firm_soft/midi_driver/cbx.html

After reboot you will have new MIDI port in your PC. Configure that port in your sampler software.
Then enter eDrum's menu and set "Output config" to "COM (34.8k)"
« Last Edit: January 28, 2012, 07:41:27 AM by admir »